Detailed Tutorial on Applying Labocosmetica HPC 2.0

Introduction Labocosmetica HPC 2.0 is an advanced hybrid polysiloxane coating designed for DIY enthusiasts seeking professional-grade protection and aesthetic enhancement for their vehicles. In this guide, we'll walk you through the step-by-step process of applying HPC 2.0 to achieve optimal results.

Quick Preparation Recap

Before applying HPC 2.0, ensure your vehicle's surface is clean, decontaminated, and free of any previous coatings or waxes. Use a surface preperation cleaner like Veritas to prepare the surface. For detailed preparation instructions, refer to Labocosmetica's official guidelines.

Step-by-Step Application Process

Step 1: Initial Setup

1. Environment: Work in a well-ventilated, dust-free area. Avoid direct sunlight and extreme temperatures. Ideal conditions are around 20-25°C with moderate humidity.
2. Tools and Products: Gather HPC 2.0, dual pile microfiber cloths, and application pads.

Step 2: Applying the Coating

1. Small Sections: Apply the coating to small sections, ideally not exceeding 60x60 cm, to ensure even coverage.
2. Application Method:
   • Shake the bottle of HPC 2.0 well before use.
   • Apply a few drops of HPC 2.0 onto an application sponge.
   • Spread the coating evenly over the section using cross-hatch patterns (horizontal and vertical strokes) to ensure complete coverage.

Step 3: Initial Curing

1. Wait Time: Allow the coating to sit on the surface for about 3-5 minutes. This initial curing period lets the product bond with the surface.
   
2. Buffing:
   • Use a clean microfiber cloth to gently buff off the excess coating.
   • Ensure all residues are removed to avoid streaks or high spots.
   • Check under different lighting angles to confirm uniform application.

Step 4: Layering (Optional)

1. Additional Layers: For extra protection or gloss, apply additional layers, waiting about 1-2 hours between each layer.
2. Repeat Application: Repeat the application and buffing process for each layer.

Step 5: Final Curing

1. Environment Control: After the final layer, ensure the vehicle remains in a controlled environment free from dust and moisture.
2. Full Curing: The coating will continue to cure over the next 12 hours. Avoid getting water on the vehicle during this period.

Step 6: Maintenance

1. Initial Days: Refrain from washing the vehicle for the first 7-10 days to allow the coating to fully harden.
2. Routine Cleaning: Maintain the coating by regularly washing with pH-neutral shampoos and avoiding abrasive cleaning tools.

Conclusion

Applying Labocosmetica HPC 2.0 is a straightforward process that provides long-lasting protection and an exceptional finish when done correctly. Follow these steps carefully to maximize the benefits of this advanced coating. For more detailed product information and to purchase HPC 2.0, visit Labocosmetica's website.

By following these steps and using the images as a visual guide, you can achieve a professional-grade finish with Labocosmetica HPC 2.0. Happy detailing!